• Stored Energy: Varies from 13 Joules up to 48 Joules (@ 240V).
• Powers 120 km (75 miles) of multi-wire fencing.
• Self diagnostic capability - Error message on LCD identifies Energizer Fault.
• Fully modular for quick servicing.
• Radio Frequency Interference (RFI) suppressed circuitry.
• Power supply requirements: 220 to 240 volt AC, 70 watts.

Special Features:

• Adaptive Control maintains a minimum output Voltage of 5.4kV right through to a heavy fence load (180 ohms).
• Remote Control enables the Energizer to be turned ON or OFF, quickly and simply, anywhere the fence is powered.
• Alarms on Output, Fence and Earth Voltage alert when voltage is under pre-set levels. Default alarm levels are: Output Voltage 3kV, Fence Voltage 3kV, Earth Voltage 500V.
• Electronic Display (backlit) provides information on:
  • Stored Energy informs how much energy (Energizer capacity) is being used to power the fence system.
  • Output Voltage shows voltage going onto the fence. If under 4kV (MX1600) or 5kV (MX2500/5000) the Energizer is overloaded.
  • Fence Voltage indicates quality of a specific fence section, informing when maintenance is required.
  • Earth Voltage monitors quality of fence Earth System and informs when earth voltage is too high for optimum fence performance.
• A Property Protection option on Fence Voltage alerts when a fence is breached.

Back